Click Here for Photo Gallery

Model  62,  2  1/2",  S/N  38436
Stock  Reel
Stock  Stand
Hydraulic  Threading  in  4Th  and  5Th
Hydraulic  Clutches
Drill  Saddles
Tool  Holders  on  Cross  Slides
Cams  and  Gears  As  Mounted
Univ.  Chip Conveyor
Guards
Complete  Electrics
 
Condition  -  V.  Good,  Tool  Slide  Is  .0015
 
Extra  Tooling  That  Comes  With  Machine:
4Th  and  5Th  Pos.  Acc.  Reaming
4Th  and  5Th  Pos.  High  Speed  Drilling
3Rd  Pos.  Recessing  (Type ?)
1St  and  4Th  Pos.  Cut  off  Holder
1St  and  4Th  Pos.  Narrow  Dovetail  Form  Holder  and  Stick  Tool  Holder
2Nd,  3Rd  and  5Th  Pos.  Narrow  and  Wide  Dovetail  Form  Holders  and  Stick  Tool  Holders
Two  Adj.  and  Reversible  Knee  Turners
One  Reversible  Knee  Turner
Two  Adj.  Boring  Holder  (1'  Shank)
Reed  B-13  Thread  Roll  Head  and  Adapter
Reed  B-18  Thread  Rool  Head  and  Adapter
the  Following  Items  Also  Come  Along:
Feed  Change  Gears  -  20-112,  21-111,  25-107,  29-103,  49-83,  51-81
Spindle  Speed  Change  Gears  -  23-109,  25-107,  29-103,  33-99,  37-95, 41-91,  63-69

Too  Slide  Cams  -  .875,  1.250,  1.500,  2.500
 
Feed  out  Cams  -  2"   and  6"
 
Cross  Slide  Cams  -  .188,  .219,  .250,  .437,  .500,  .625,  .750
 
Spindle  Collet  Pads-
Hex
13/16
7/18
15/16
1 1/8
1 5/16
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 11/16
1 3/4
1 13/16
1 7/8
 
Round
1 5/16
1 7/16
1 1/2
1 9/16
1 5/8
2 1/8
 
Feed  Fingers  -  1 7/16  Rd.,  1 1/2  Rd,  1 5/8  Rd.  And  2 1/8"