Click Here for Photo Gallery

Specification
Bar capacity Round 1" (25.4 mm)
Hex. (A/F) 0.86” (21.8mm)
Square (A/F) 0.70" (17.7 mm)
Bar feed stroke Standard 0-5" (0-127 mm)
Long bar feed 1/2 -8" (12-203 mm)
Double bar feed 1/2 -5" (12-127 mm)
Double long bar feed 1/2 -8" (12-203 mm)
Feed stroke on main tool block 0-21/2” (0-63.5 mm)
Feed stroke on independent slides 0-21/2” (0-63.5 mm)
Approach stroke on main tool block
Standard 21/2" (63.5 mm)
Special 2" (50.8 mm)
Approach stroke on independent slides
Standard 21/2" (63.5 mm)
Special 2" (50.8 mm)
Feed stroke on lower cross slides 0-1/2" (0-12.7 mm)
Feed stroke on upper cross slides 0-1/2" (0-12.7 mm)
Feed stroke on intermediate cross slides 1/32 -1/2“ (0.8-12.7 mm)
Motor 11 kW at 1450 rev/min
Standard 247-3030 rev/min in 24 steps
Spindle speed range Spindle stopper 220-2694 rev/min in 24 steps
Feed range at max. stroke (/rev)
Standard 0.005-0.056" (0.12-1.34 mm)
Spindle stopper 0.0056-0.063" (0.13-1.51 mm)
Idle time Standard 1.37 secs
Spindle stopper 1.37 secs
Long bar feed 1.92 secs
Range of cycle times Standard 2.4-129 secs
Spindle stopper 2.4-129 secs
Overall dimensions - without stock carriage 491/2 x 1233/4 "(1257x3143mm)
Overall dimensions - with stock carriage 491/2 x 238 "(1257x6047mm)
Approximate nett weight (including electrics
and stock carriage) 13890lb (6313kg)

Machine rebuilt 1986 then run on a very limited basis,

Pick off and back finishing
Universal Threading
Chip Conveyor
Tooling is included.

Owner willing to set machine up to run a job.